Overview

Transponder Programming
This Package can be classified as “Transponder reading” and ” Transponder writing”

Transponder Reading
Transponder details are shown as Pin code, Kilometer, VIN and Key number related to type of transponder data, transponder referance and transponder. In order to use this feature, you can click on “read” button in the software, click on the “R” button on the ZED-BULL or use “Read Chip” option in the first row of the main menu.

Transponder writing ( Copying )
This operation can be done in two different options as Manuelly (Entring with Hand) and Copying. Its the possible Writing Manuelly datas on following transponders if you save the datas of the previously coming car.

  • Temic 11
  • Temic 12
  • Megamos 13
  • Megamos 14
  • Philips 33
  • Texas 4C
  • Holden Commodore

Eeprom and MCU Aplications
This is one of the main application that has increasingly popularity day after day and is updated the most often. Lets examine this application.
Eeprom is an electronic component that can store and save digital informations inside without need of connection any power supply. Therefore its used in immobilizer units of vehicles and save safety significant informations belonging vehicles.
MCU is a chip like Eeproms but It also has sending and receiving datas, controling other components on the circuit board. Eeprom is in MCU as an integrated.
The most clear differences between them is Eeproms have 8 legs, MCUs can have 28, 52, 64, 112…
Necessary informations like key, pincode are in integrated Eeprom in MCU or an external Eeprom which is replaced on the circuit board.

Why do we need to be read Eeprom and MCU?
MCU and Eeproms have Key and/ or pin code info. These chips are read by programmers (ex. Zed-Prog). You will need a proffesional help to get pin code, important informations from that chips. This profesional help is provided you by Zed-BULL’s Eeprom and MCU application.

When do we need to be read Eeproms and MCUs?
Some vehicles may be not have a key programming procedure though OBD. Immobilizer units should be completely changed in case of losing all keys. The solution of this needs long time and cost. But with Zed-BULL’s Eeprom and MCU application, the keys recorded in the immobilizer can be programmed again.
Some vehicles can have a procedure for programming through OBD but OBD programmer can be not excist. In this case, Eeprom and MCU application need to be used.
Sometimes Both key programming procedure through OBD and OBD programmer can be excist but you can face the connection problem with Vehicle. In this case, Eeprom and MCU application need to be used.
Sometimes the key programing procedure through OBD can be excist but for this the security code needs to be entre into Vehicle. Eeprom and MCU application need to be used to calculate pincode in case of not excist security code and not being able to get that security code through OBD.
Sometimes coded transponders need to be usued according to VIN of Vehicle to be able to programme, you can obtain this transponders from Services but that can be costly, demanding and also always may not be found. Instead of this you can produce by getting informations from the Eeprom and MCU of the Vehicle, after finding easly coded chips according to the VIN of that Vehicle, for that you need only ZED-BULL Eeprom and MCU applications.

Producing Transponder
Purpose :  Transponders can be produced in different group of vehicles by using cheap blank transponders. So that, only groups of transponders can be used for expensive vehicles instead of using for each vehicle.

Important notes
Produced Transponders are the same with coming from Service.
Costs will be low due to using blank transponders
You will be economised time and money by using only a few group of transponder instead of using for each vehicle different transponder.
Produced Transponders are used only to programme through OBD. Not be used for copying or Eeprom applications.
Producing Transponder application is located in main menu of ZED-BULL pc software under the producing Transponder title.

Zed-PROG


zprg_masali
Zed-Prog, is a tool to read various types of Eeproms and processors without using Pc software, removing eeprom and MCU(in most occasions).
Zed-Prog, reads most of the Zed-BULL Eeprom applications in circuit with a help of reader clips and reads most of the processors(both in circuit or with removal). Biggest advantage of Zed-Prog is; it does not require Pc software to operate, yet another advantage of it is; it does read most of the eeproms and processors in circuit, without removing them off the circuit board. It is faster, easier and more secure to read the eeproms & processors.

1 Click for user manual.
2 Click for Module 11 connection pictures

Zed-Prog Eeprom Pack(Standart Pack) :
You may program following Eeprom modules of Zed-BULL with the Zed-Prog Eeprom pack; 3, 4, 6, 12, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 28, 29, 33, 34, 35, 36, 37, 38, 39, 42, 43, 45, 46, 47, 49, 53, 55, 57, 62, 63, 67, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 83, 87, 88, 89, 92, 93, 94, 95, 96, 97, 98, 99, 100. You may see details of the application list HERE.

eeprom001eeprom002

eeprom003eeprom004

 

 

 

 

Zed-Prog PACK 1 (MC68HC05E6) :
You may program modules 8, 50, 51 using this pack. Click HERE for application guide.
pack1

 

 

 

 

 

Zed-Prog PACK 2 (MC68HC11EA9) :
You may program modules 30, 31, 32 using this pack. Click HERE for application guide.
pack2_001
pack2_002

 

 

 

 

Zed-Prog PACK 3 (MC68HC(7)05BXX) :
You may program modules 5, 7, 13, 40, 44, 54 , 56, 60, 66 using this pack. Click HERE for application guide.
pack3

 

 

 

 

 

Zed-Prog PACK 4 (MC9S12DGXXX) :
You may program modules 11, 25, 27, 61, 65, 68 using this pack. Click HERE for application guide.
pack4

Zed-Prog PACK 5 (TMS) :
You may program modules 1, 2, 52, 58, 59 using this pack. Click HERE for application guide.
pack5

Zed-Prog PACK 6 (64 Pin Motorola) :
You may program modules 9, 10, 41, 47, 64 using this pack. Click HERE for application guide.
pack6_001 pack6_002

 

 

 

OBD Modules

Renault Dacia (OBD A) Kablosu
Zed-BULL ile birlikte kullanılabilen ve Renault-Dacia araçlara OBD2 üzerinden anahtar ve kumanda programlama yapabileceğiniz, kullanımı kolay bir modüldür. 2012 yılına kadar diagnostik olarak anahtar programlanabilen tüm araç uygulamalarını kapsamaktadır. Programlama için pin koduna ihtiyaç duyulmamaktadır. Bilgisayar ile kullanılamamakta, sadece ve sadece Zed-BULL ile birlikte kullanılabilmektedir.
rdc

Opel (OBD-B/B2) Kablosu
Zed-BULL ile birlikte kullanılabilen ve Opel araçlara OBD2 üzerinden anahtar ve kumanda programlama yapabileceğiniz, kullanımı kolay bir modüldür. 2012 yılına kadar diagnostik olarak anahtar programlanabilen birçok araç uygulamalarını kapsamaktadır. Programlama için genellikle pin koduna ihtiyaç duyulmamakta, bazı ECU tipleri için pin koduna ihtiyaç duyulmaktadır. Bilgisayar ile kullanılamamakta, sadece ve sadece Zed-BULL ile birlikte kullanılabilmektedir.
oc

Daewoo – Chevrolet (OBD-C) Kablosu
Zed-BULL ile birlikte kullanılabilen ve Daewoo-Chevrolet araçlara OBD2 üzerinden anahtar ve kumanda programlama yapabileceğiniz, kullanımı kolay bir modüldür. 2012 yılına kadar diagnostik olarak anahtar programlanabilen birçok araç uygulamalarını kapsamaktadır. Programlama için pin koduna ihtiyaç duyulmamaktadır. Bilgisayar ile kullanılamamakta, sadece ve sadece Zed-BULL ile birlikte kullanılabilmektedir.
dcc

Fiat (OBD D) Kablosu
Zed-BULL ile birlikte kullanılabilen ve Fiat-Lancia araçlara OBD2 üzerinden anahtar ve kumanda programlama yapabileceğiniz, kullanımı kolay bir modüldür. 2012 yılına kadar diagnostik olarak anahtar programlanabilen birçok araç uygulamalarını kapsamaktadır. Programlama için pin koduna ve önkodlu anahtara ihtiyaç duyulmaktadır. Araca ait önkodlu anahtar ve pin kodu servisten alınabilir veya yine Zed-BULL eeprom uygulaması ile elde edilebilir. Bilgisayar ile kullanılamamakta, sadece ve sadece Zed-BULL ile birlikte kullanılabilmektedir.
flc

Ford / Mazda (OBD E) Kablosu
Zed-BULL ile birlikte kullanılabilen ve Ford-Mazda araçlara OBD2 üzerinden anahtar ve kumanda programlama yapabileceğiniz, kullanımı kolay bir modüldür. 2012 yılına kadar diagnostik olarak anahtar programlanabilen tüm araç uygulamalarını kapsamaktadır. Programlama için pin koduna ihtiyaç duyulmamaktadır. Bilgisayar ile kullanılamamakta, sadece ve sadece Zed-BULL ile birlikte kullanılabilmektedir.
fmc

VAG (OBD F) kablosu
Zed-BULL ile birlikte kullanılabilen ve VAG Grubu(Volkswagen, Audi, Skoda, Seat) araçlara OBD2 üzerinden anahtar ve kumanda programlama yapabileceğiniz, kullanımı kolay bir modüldür. 2012 yılına kadar diagnostik olarak anahtar programlanabilen birçok araç uygulamalarını kapsamaktadır. Programlama için pin koduna ihtiyaç duyulmamaktadır. Harici anteni sayesinde önkodlu transponder oluşturma işlemi gerçekleştirilip programlama kısa sürede yapılabilmektedir. Bilgisayar ile kullanılamamakta, sadece ve sadece Zed-BULL ile birlikte kullanılabilmektedir.
fmc

SW & Drivers

Zed-PROG and Zed-BULL Files

Zed-PROG Driver
Zed-BULL Driver
Zed-BULL Pc Software Version 7.6.0

OBD Module Driver Files

VAG OBD Driver
Renault OBD Driver
Opel OBD Driver
Ford OBD Driver
Fiat OBD Driver
Chevrolet OBD Driver

Videos

loading videos
Loading Videos...

Application Lists

Copyright@istanbulanahtar.com