PC Software
| 2.0.80 | -The 7935 system has been added to the detailed reading and writing application. | 29.03.2022 |
| 2.0.79 | -Changes were made in the log sending process infrastructure. | 02.03.2022 |
| 2.0.78 | -General Update. | 10.02.2022 |
| 2.0.76 | -General Update. | 24.10.2021 |
| 2.0.75 | -Added precode generation menu from remote control key running Fiat. | 20.09.2021 |
| 2.0.74 | -Added PIN code finder menu from Renault Master3 working key. | 08.09.2021 |
| 2.0.73 | -General Update. | 12.05.2021 |
| 2.0.72 | -General Update. | 30.04.2021 |
| 2.0.71 | -Renault 4D Pin Code Calculation process has been changed. | 25.02.2021 |
| 2.0.70 | -General Update. | 05.01.2021 |
| 2.0.69 | -General Update | 11.12.2020 |
| 2.0.68 | – Added New Eeprom/MCU Module 275 Programmed transponder start the vehicle.(Module 275-Mercedes 33 Rolling System, MC68HC05X32(0D53J/0D66J/0D69J/1D69J), QFP, 64pin). – Added New Eeprom/MCU Module 276 Programme the Transponder to the Vehicle with a Diagnostic Device Using the Calculated Pincode.(Module 276-Magnetti Marelli IAW (4HV) 4MV ECU, 95080). – DST 40 BIT / 4D, DST 80 BIT and DST AES / 128 BIT Menus Added to Crypto Coded Transponder (Read & Write) Application. – W906 Cookie Added In Addition to MB EZS / EIS Lost Key Programming application. |
14.10.2020 |
| 2.0.67 | – Added New Eeprom/MCU Module 274 Programmed transponder start the vehicle.(Module 274-Suzuki Bikes ECU Denso, 93C66, SOIC, 8pin). | 04.09.2020 |
| 2.0.66 | -General Update | 29.07.2020 |
| 2.0.65 | -General Update | 28.07.2020 |
| 2.0.64 | – Added New Eeprom/MCU Module 273 Programmed transponder start the vehicle.(Module 273-TOYOTA 86 – SUBARU BRZ ID DST80, 93C86, SOIC, 8pin). | 23.07.2020 |
| 2.0.63 | -General Update | 07.07.2020 |
| 2.0.62 | -General Update | 12.06.2020 |
| 2.0.61 | -General Update | 23.05.2020 |
| 2.0.60 | -General Update | 13.05.2020 |
| 2.0.58 | -In addition to the “Update with Card Reader” button in the SD Card form section, the SD Card was updated. | 04.04.2020 |
| 2.0.57 | -General Update | 12.03.2020 |
| 2.0.56 | -General Update | 12.02.2020 |
| 2.0.55 | -General Update | 06.02.2020 |
| 2.0.54 | -VAG Online you can add a key even all keys are lost. | 25.12.2019 |
| 2.0.53 | -General Update. | 06.12.2019 |
| 2.0.52 | -Added New Eeprom/MCU Module 272 Using calculated incode, a new transponder can be programmed using Zed-FULL OBD Ford application on vehicle. (Modül 272-Ford USA Mustang Fusion, MPC5607B, QFP) |
13.11.2019 |
| 2.0.51 | -General Update. | 17.10.2019 |
| 2.0.49 | -General Update. | 19.09.2019 |
| 2.0.48 | -Eeprom/MCU Module 91 updated. | 16.09.2019 |
| 2.0.47 | -3 different options were offered for PC program update. | 27.05.2019 |
| 2.0.46 | -General Update. | 27.05.2019 |
| 2.0.45 | -Added New Eeprom/MCU Module 271 that includes CS code and pin code finding. (Module 271-Audi A6/Q7 EZS, MC9S12DG128(3L40K/1L59W)-MC9S12DG256(0L01Y)) |
21.05.2019 |
| 2.0.44 | -General Update. | 02.04.2019 |
| 2.0.43 | -General Update. | 22.03.2019 |
| 2.0.42 | -General Update. | 15.01.2019 |
| 2.0.41 | -VAG MQB online pin code menu added (beta). This is a chargeable application. Require special VAG online token. -Ford V Tape Code app added. |
11.02.2019 |
| 2.0.39 | -General Update. | 29.01.2019 |
| 2.0.38 | -Added New Eeprom/MCU Module 268 that includes transponder programming and image file creating.(Module 268-Alfa Romeo 159 Ignition, 24LC04B). -Added New Eeprom/MCU Module 269 that includes transponder programming and image file creating.(Module 269-Fiat Croma Ignition, 24LC04B). -Added New Eeprom/MCU Module 270 that includes transponder programming.(Module 270-Alfa Romeo 159, Fiat Croma BSI, MC9S12DG256(1K79X)) |
14.01.2019 |
| 2.0.37 | -General Update. | 02.01.2019 |
| 2.0.36 | -Added New Eeprom/MCU Module 350 that includes transponder programming. (Module 350 – Tesla Beta, MC9S12XEP100(1N35H)) -Added New Eeprom/MCU Module 351 that includes transponder programming and image file creating. (Module 351 – Porsche BCM Beta, MC9S12XDP512(1L15Y)-MC9S12XET512(2M25J)-MC9S12XEP100(5M48H)) |
10.12.2018 |
| 2.0.35 | -SD card update process is improved. | 06.11.2018 |
| 2.0.34 | -General Update. | 23.10.2018 |
| 2.0.33 | -Added New Eeprom/MCU Module 266 that includes transponder programming. (Module 266-Suzuki motorbike Denso immo,93C86). -Added New Eeprom/MCU Module 267 that includes transponder programming. (Module 267-Suzuki Bikes ECU,24C0) |
22.10.2018 |
| 2.0.32 | -SD card update process is improved. | 20.09.2018 |
| 2.0.31 | -Added New Eeprom/MCU Module 265.(Module 265-Fiat EGEA DELPHI BSI, NEC D70F3556) | 06.09.2018 | 2.0.30 | -General Update. | 03.07.2018 |
| 2.0.29 | -ZFH UTE update process is improved. | 11.06.2018 |
| 2.0.28 | -General Update . | 30.05.2018 |
| 2.0.24 | -General Update . | 17.04.2018 |
| 2.0.23 | -In addition to the PC program update, an alternative download has been added. | 23.03.2018 |
| 2.0.22 | -General Update . | 15.03.2018 |
| 2.0.21 | -General Update . | 13.03.2018 |
| 2.0.20 | -General Update . | 27.02.2018 |
| 2.0.19 | -General Update . | 07.02.2018 |
| 2.0.18 | -General Update . | 12.01.2018 |
| 2.0.17 | -General Update . | 03.01.2018 |
| 2.0.15 | -Detailed reading and writing menu added. -Changes were made to the log sending screen. -During OBD update, the last 5 version information was displayed and the desired version download screen was made. |
04.12.2017 |
| 2.0.14 | -Added New Eeprom/MCU Module 264 that includes Pin code finding. (Module 264-Jeep, Dodge Continental RFHUB, MC9S12XEG384 (1M12S-3M25J) |
16.10.2017 |
| 2.0.13 | -Added New Eeprom/MCU Module 258 that includes Pin code and CS code finding. (Module 258 Renault Clio 4, NEC 70F3633). -Added New Eeprom/MCU Module 259 that includes transponder programming and image file creating. (Module 259 Alfa Romeo Guiletta M.Marelli BSI, 95320). -Added New Eeprom/MCU Module 260 that includes transponder programming and image file creating. (Module 260 Fiat,Peugeot,Iveco M.Marelli BSI, 95640). -Added New Eeprom/MCU Module 261 that includes transponder programming and image file creating. (Module 261 Fiat, Lancia, Citroen, Peugeot Texton immo, 93C66-95040). -Added New Eeprom/MCU Module 262 that includes Pin code finding. (Module 262 Jeep, Dodge Continental RFHUB, MC9S12XEG384 (3M25J) |
16.08.2017 |
| 2.0.12 | -General Update . | 16.08.2017 |
| 2.0.11 | -Added New Eeprom/MCU Module 256 that includes transponder programming and image file creating. (Module 256 DODGE(Mercedes) Sprinter USA 46, MC9S12DP256(0L01Y-1K79X). -Added New Eeprom/MCU Module 257 that includes Pin code and CS code finding. (Module 257 EDC17/MED17 Bosch ECU, TC1797 |
15.08.2017 |
| 2.0.01 | -Module Update screen has been changed.”Fix Screen Messages” added. | 17.07.2017 |
| 1.0.81 | -General Update . | 06.07.2017 |
| 1.0.80 | -Added MD46 transponder option for 46 type key copy. | 15.06.2017 |
| 1.0.79 | -General Update . | 04.05.2017 |
| 1.0.78 | -SD card update process is improved. | 31.03.2017 |
| 1.0.76 | -General Update. | 14.03.2017 |
| 1.0.75 | -Added ZFH46-Sniffer for pin code. | 23.02.2017 |
| 1.0.74 | -General Update. | 26.01.2017 |
| 1.0.73 | – Added New Eeprom/MCU Module 255 that includes Pin code finding, CS code finding and transponder programming. (Module 255 – Comfort Passat, 95320) |
28.12.2016 |
| 1.0.72 | -Module test update process is improved. | 14.11.2016 |
| 1.0.71 | -General Update. | 03.11.2016 |
| 1.0.70 | -Eeprom log process is improved. | 08.09.2016 |
| 1.0.69 | -Added New Eeprom/MCU Module 253 that includes pin code finding and transponder programming. (Module 253 – VAG VDO Instrument Cluster, MC9S12H256(2K78X)). -Send pictures in the display section has been added to send logs. |
05.09.2016 |
| 1.0.68 | -General Update . | 23.08.2016 |
| 1.0.66 | -SD card update process is improved. | 01.08.2016 |
| 1.0.65 | -SD card update process is improved. | 27.06.2016 |
| 1.0.64 | -Upgrading mainboard screen. | 09.06.2016 |
| 1.0.63 | -Added New Eeprom/MCU Module 252 that includes pin code and cs code finding. (Module 252 – VAG ECU ME7,1,1, 95p08).-Recycling log send. |
24.05.2016 |
| 1.0.62 | -General Update . | 22.04.2016 |
| 1.0.60 | -SD Card Simulator device update. | 14.03.2016 |
| 1.0.58 | -IR-PROG updated. | 09.02.2016 |
| 1.0.55 | -General Update . | 04.01.2016 |
| 1.0.54 | -7946 transponder reading problem was resolved. | 09.12.2015 |
| 1.0.53 | -Added New Eeprom/MCU Module 250 that includes transponder programming. (Module 250 – Toyota,Lexus,Subaru Smart Key Module Denso, 93C86).-Added New Eeprom/MCU Module 251 that includes transponder programming. (Module 251 – Toyota,Lexus,Subaru Smart Key Module Denso, 93C66). |
01.11.2015 |
| 1.0.52 | -Added load daily LIFS. | 27.10.2015 |
| 1.0.51 | -Added New Eeprom/MCU Module 249 that includes transponder programming. (Module 249 – Volvo BSI S40,V40,V50 ID 48, MC9S12DP256-MC9S12DG256).-French Language has been added. |
13.10.2015 |
| 1.0.50 | -For Detailed Reading and writing process.-11 Temic Transponder, we released writing upgrade for T5 and TK5551. -12 Temic Transponder, we released writing upgrade for T5 and TK5551.-13 Temic Transponder, we released writing upgrade for T5 and TK5551. -14 Temic Transponder, we released writing upgrade for T5 and TK5551.-33 Philips Transponder, we released writing upgrade for PCF7930, PCF7931 and T5.-4C Texas Transponder, we released writing upgrade for TPX1, EH2, Z4C, CN1 and CN2.-73 Philips Multiblock Transponder, we released writing upgrade for PCF7930, PCF7931 and PCF7935.-German Language has been added. |
01.10.2015 |
| 1.0.49 | -General Update. | 02.09.2015 |
| 1.0.48 | -MB Key programming application has been added.-MB EZS/EIS dump file saving application has been added .-IR-PROG update application has been added.-ZFH-MB update application is added.-MB EZS/EIS process of sending the log was added. |
31.07.2015 |
| 1.0.47 | -General Update. | 28.07.2015 |
| 1.0.46 | -Added New Eeprom/MCU Module 246 that includes pin code finding and transponder programming. (Modül 246 – Fiat dashboard Marelli,95C160).-Added New Eeprom/MCU Module 247 that includes transponder programming. (Modül 247 – BMW CAS1 Type2(E66),MC9S12DG256).-Added New Eeprom/MCU Module 248 that includes transponder programming. (Modül 248 – BMW CAS3 Type2,MC9S12DG256).-SD card login screen has been simplified drawing. |
22.07.2015 |
| 1.0.45 | -General Update. | 15.06.2015 |
| 1.0.44 | -Added New Eeprom/MCU Module 234 that includes transponder programming. (Module 234-TATA VALEO immobox ID 46, 24C04). -Added New Eeprom/MCU Module 235 that includes transponder programming. (Module 235-Honda motorbike immo, 93C66). -Added New Eeprom/MCU Module 236 that includes transponder programming. (Module 236-Honda motorbike immo, 93C66). -Added New Eeprom/MCU Module 237 that includes transponder programming. (Module 237-Honda motorbike immo, 93C86). -Added New Eeprom/MCU Module 238 that includes transponder programming. (Module 238-Kawasaki Bikes ECU Denso, 93C86). -Added New Eeprom/MCU Module 239 that includes pin code finding and transponder programming. (Module 239-Fiat, Suzuki Siemens VDO immo, MC68HC908AB16A(L72A)).-Added New Eeprom/MCU Module 240 that includes pin code finding. (Module 240-PSA Valeo BSI, 95040).-Added New Eeprom/MCU Module 241 that includes pin code finding. (Module 241-Renault SAGEm UCH, 95160). -Added New Eeprom/MCU Module 242 that includes transponder programming. (Module 242-Subaru i immobox, 24C01). -Added New Eeprom/MCU Module 243 that includes transponder programming. (Module 243-Subaru DENSO immobox, 93C56). -Added New Eeprom/MCU Module 244 that includes transponder programming. (Module 244-Subaru Mitsubishi immobox, MC68HC805P18(H44H-G64R). -Added New Eeprom/MCU Module 245 that includes transponder programming. (Module 245-Yamaha Moric immo, S29190). -If the appearance of the icons on the home screen, the application was prepared for repair. |
07.05.2015 |
| 1.0.43 | -Now possible to get a info message,when you send a SD Card Log.-The Process of modüle update has been revised. | 30.03.2015 |
| 1.0.42 | -Added New Eeprom/MCU Module 229 that includes transponder programming. (Modül 229-Daihatsu immobox Tokai-Rika ID 67). -Added New Eeprom/MCU Module 230 that includes transponder programming and image file creating. (Modül 230-Hyundai,Kia ECu KEFICO) . -Added New Eeprom/MCU Module 231 that includes transponder programming and image file creating. (Modül 231-Hyundai,Kia ECu KEFICO) . -Added New Eeprom/MCU Module 232 that includes transponder programming and image file creating. (Modül 232-Hyundai,Kia ECu BOSCH) . -Added New Eeprom/MCU Module 233 that includes transponder programming and image file creating. (Modül 233-Hyundai,Kia ECu BOSCH). -SD card update process is improved |
03.03.2015 |
| 1.0.41 | -General Update. | 26.02.2015 |
| 1.0.40 | -General Update. | 21.02.2015 |
| 1.0.39 | -SD card update process is improved. | 16.02.2015 |
| 1.0.38 | -In TPX2 and EH2 copying processes,4E and 4D converting problem have been solved. | 30.01.2015 |
| 1.0.37 | -Added New Eeprom/MCU Module 218(Toyota, Lexus immobox ID DST80) Transponder: DST80. -Added New Eeprom/MCU Module 219(SUBARU 2013 BCM Mitsubishi ID DST80) Transponder: TMS 37145(BLANK DST80). -Added New Eeprom/MCU Module 220(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 221(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 222(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 223(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 224(Land Rover,Range Rover immobox) Transponder: PCF7936. -Added New Eeprom/MCU Module 225(Chevrolet, Opel immobox ID46) Transponder: PCF7936. -Added New Eeprom/MCU Module 226(Hyundai,Kia immobox Shin Chang with ID4D) Transponder: JMA TPX2, Silca EH2, CN2, DST4D. -Added New Eeprom/MCU Module 227(Opel Astra J,Chevrolet Cruze BCM) Transponder: Original Remote Key. |
22.01.2015 |
| 1.0.36 | -Added New Eeprom/MCU Module 218(Toyota, Lexus immobox ID DST80) Transponder: DST80. -Added New Eeprom/MCU Module 219(SUBARU 2013 BCM Mitsubishi ID DST80) Transponder: TMS 37145(BLANK DST80). -Added New Eeprom/MCU Module 220(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 221(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 222(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 223(Chrysler, Jeep immobox DaimlerChrysler) Transponder: PCF7936. -Added New Eeprom/MCU Module 224(Land Rover,Range Rover immobox) Transponder: PCF7936. -Added New Eeprom/MCU Module 225(Chevrolet, Opel immobox ID46) Transponder: PCF7936. -Added New Eeprom/MCU Module 226(Hyundai,Kia immobox Shin Chang with ID4D) Transponder: JMA TPX2, Silca EH2, CN2, DST4D. -Added New Eeprom/MCU Module 227(Opel Astra J,Chevrolet Cruze BCM) Transponder: Original Remote Key. |
07.01.2015 |
| 1.0.35 | -Fixed bug which appears during update sd card. | 02.01.2015 |
| 1.0.34 | -SD card update process is improved. | 30.12.2014 |
| 1.0.33 | -Online coding service application has been added.-Percentage display has been added when the PC software is run. -Select date has been added before SD card log is sent.-Russian Language has been added. |
19.12.2014 |
| 1.0.32 | -Fiat 46 Precoding process is improved. | 22.10.2014 |
| 1.0.31 | -General Update. | 16.10.2014 |
| 1.0.30 | -SD card update process is improved. | 08.10.2014 |
| 1.0.29 | – The Pin code extraction which is via ZFH46 has been added for (Renault Symbol, Nissan Primera, Kia Hyundai ve Fiat Panda) in additional to Which has been already added via TK60 for the same vehicles (Renault Symbol, Nissan Primera, Kia Hyundai ve Fiat Panda). |
29.09.2014 |
| 1.0.28 | -Module Changes were made to the update screen. | 26.08.2014 |
| 1.0.27 | -General Update . | 18.08.2014 |
| 1.0.26 | – Fiat 46 Precoding application (Doblo, Fiorino, Grande Punto, 500, Nemo, Beeper, Tepee, Mito, KA, Corsa) has been added. Update and unlocking for RNR 126-PCF 7961 (Fluence, Scenic3, Megane3, Latitude added key) which is produced by IEA has been added. |
04.07.2014 |
| 1.0.25 | -The packages of the Language have been updated. – ZFH46 pictures have been revised. | 04.06.2014 |
| 1.0.24 | – ZFH46 updating process added.- My account privacy form added for the users. – Transponder log take-up process via SD card added.- Eeprom 217 module added.- Polish language added. |
27.05.2014 |
| 1.0.23 | – Fluence,Megane3,Scenic3,Latitude 2012 and after (systems of giving datas which is 09090909) finding pin code from Key if there is working key has been added. – Greek language has been added. |
28.04.2014 |
| 1.0.22 | – Application of unlocking remotes which is used by using CO4 socket for BMW CAS application has been added. – Eeprome 214 and 215 modules have been added. |
24.03.2014 |
| 1.0.21 | 213 eeprom modules added. | 25.02.2014 |
| 1.0.20 | -Emulator 4, 5, 6 copying key to key, unlocking and update operations have been added. -BMW 33 rolling code transponder reading is updated -Sending e-mail to users for LIFS terms added. -46 cloning onto TPX3/4 transponder is added. |
05.02.2014 |
| 1.0.19 | – New eeprom modules added up to module 212 – SD card updating process has been improved – Hyundai-Kia pincode finding from internet server has been fixed up to 5 for per day. – Listing of applications according to regional selection has been added. |
09.01.2014 |
| 1.0.18 | -General Update. | 16.12.2013 |
| 1.0.17 | -Saving eeprom dumps from Zed-FULL to Computer added -Cloning function Megane-3, Fluence remote keys onto IEA made emulators added. |
11.12.2013 |
| 1.0.16 | -SD card update process is improved. -Spanish Language is added. -8C reading improved. | 11.11.2013 |
| 1.0.15 | BMW CAS1, CAS2, CAS3 and CAS+ modules updated. | 06.11.2013 |
| 1.0.14 | – 33 different new eeprom applications added to PC software. Now there are 205 different eeprom applciations on PC Software. – Log file sending for Eeprom board added. – Kia&Hyundai pincode calculation from VIN(Online) added. |
28.10.2013 |
| 1.0.13 | – 12 new different eeprom applications about VAG added to PC software. | 23.09.2013 |
| 1.0.12 | – 160 different eeprom applications added to PC software – 46 based Fiat remote cloning onto Emulator3 added(with internet) – Emulator2 and Emulator3 unlock functions added(with internet) – 46 Biphase mode transponder cloning onto TS46 added(with internet). – Czech Language added to PC Software. – Log file sending for Zed-FULL-Remote Board added. Note: * Emulator1: IEA made 1 button Flick remote key for Fiat Models using 48 transponder(remote function can be cloned with help of Emulator Cable) * Emulator2: IEA made 3 buttons Flick remote key for Fiat Models using 48 transponder(remote function can be cloned with help of Emulator Cable) * Emulator3: IEA made 3 buttons Flick remote key for Fiat Models using 46 transponder. This feature also covers Peugeot-Citroen cars which has Fiat system(both transponder and remote functions can be cloned from Zed-FULL antenna). |
16.09.2013 |
| 1.0.11 | – CN2 transponder copy. | 12.07.2013 |
| 1.0.10 | – Emulator Update – Paket Detail – SD Card Clear. | 09.07.2013 |
| 1.0.9 | – Log file sending for Main Board added – Device info menu activated – Pack Request added – SD card updating for 64 Bit OS updated – Italian and Portuguese Languages added to PC SW. |
20.06.2013 |
| 1.0.8 | – Register form updated. – SD card update window view changed. | 29.05.2013 |
| 1.0.7 | – Module Update screen has been changed. – SD Card Update screen has been changed. – Credit installation process is ready, the installation process automatically at startup loan. – Open the software without internet. |
23.05.2013 |
| 1.0.6 | – Emulator UIDCheck function added – Credit Bank funtion added – Credit Request added – Unlocking TS46 transponder added – 46 transponder based Nissan Primera-Almera pin code calculation from key added – 60-64 transponder based Megane-Scenic pin code calculation from key added – 46 transponder based Hyundai-Kia pin code calculation from key added – 46 transponder based 2011-2012 Symbol-Duster pin code calculation from key added. – 11, 12, 13, 33, 73, 4C transponder cloning from PC software added. – 42 Transponder reading improved. – Version Details menu added – SD card updating improved. – Log file sending function added. – Checking SD card version at start up added. |
17.04.2013 |